Slurry pipeline flotation equipment · Finland

Side-Opening PE Foam Pipe Floats for Dredging & Slurry Pipelines

Solid closed-cell PE foam flotation for industrial floating pipelines, installed from the side without decoupling pipe sections.

Request a flotation & spacing calculation

Side-opening PE foam pipe floats installed on an industrial slurry pipeline

Technical Specifications & Pipe Size Review

The initial master product is PF-315, based on a historically field-proven flotation body for OD315 pipe. Final float quantity and spacing depend on the actual pipe, transported medium and operating conditions.

PF-315 for 315 mm slurry pipe

For an OD315 HDPE slurry pipeline, the calculation uses the pipe SDR or wall thickness, pipeline length, fitting mass, slurry density or specific gravity, water type and required flotation reserve.

Common HDPE pipe ODs: 110–800 mm

Pipetechno can review applications using common HDPE outside diameters of 110, 160, 225, 315, 400, 500, 630, 710 and 800 mm, approximately 4–32 inches. These dimensions describe the application review range; they do not mean that every float geometry is already available for production.

SDR11 and SDR17 pipe data

SDR11, SDR17 and other wall configurations materially affect pipe weight and the required buoyancy. Actual outside diameter and SDR or wall thickness must therefore be provided with the RFQ.

Side-Opening Installation Principle (No Pipe Decoupling)

The flexible flotation body has a longitudinal opening that allows it to be positioned around an assembled pipeline from the side. The pipe section does not need to be passed through a closed float body.

New and existing floating pipelines

The same installation principle can be considered during initial assembly, retrofit work, float replacement and modification of an existing dredging or slurry line.

Closed-Cell PE Foam vs. Hollow HDPE Floats

A conventional hollow HDPE shell can crack or split during rough towing or heavy impact, allowing its internal cavity to flood. A solid closed-cell PE foam body does not depend on one sealed air chamber for buoyancy.

Closed-cell structure

Buoyancy is distributed through the intact flotation material. Local surface damage therefore remains local instead of opening one large hollow volume to water.

Impact, abrasion and UV protection

The foam body absorbs local impacts and resists abrasion. The protective outer-layer specification, including UV resistance for the intended operating environment, is confirmed during application review and quotation.

Request a Flotation & Spacing Calculation

Send the pipe outside diameter, SDR or wall thickness, floating pipeline length, pipe material and slurry density. Pipetechno will review the application and determine the required flotation configuration.

Minimum Order Quantity: 30 units.

Start the RFQ Download technical overview